MENU

Preventative Maintenance

Reduce downtime by monitoring current draw to detect anomalies and predict or indicate equipment wear or failure early

Detects Early Warning Signs of Equipment Failure

Predictive maintenance relies on identifying subtle changes in equipment behavior—especially power anomalies that occur before mechanical issues become visible. This visibility allows maintenance teams to intervene early, reducing emergency repairs and unplanned downtime.

3. Self-Powered and Maintenance-Free

Unlike traditional current sensors or smart meters, the CT300 is self-powered, harvesting energy directly from the wire it monitors. This makes it especially suitable for large-scale, distributed assets or equipment located in hard-to-reach or remote locations.

®

Wireless, Long-Range Communication via LoRaWAN

Predictive maintenance only works when data is accessible. The CT300 leverages LoRaWAN, which makes the CT300 perfect for industrial plants, commercial buildings, campuses, and distributed infrastructure.

Fast, Non-Invasive Installation

The CT300 is a clamp-on sensor—meaning it can be installed in minutes without rewiring panels, interrupting operations, that ease of installation lowers barriers to adoption and allows facilities to scale and monitor faster and more efficiently.

Preventative Maintenance for Energy & Utilities with the MultiTech CT300

Minimize Downtime. Maximize Uptime. Monitor Smarter by connecting Data to Decisions

In energy and utility operations, unplanned equipment failure isn’t just inconvenient—it’s costly, dangerous, and disruptive. The MultiTech CT300 Current Transformer, powered by LoRaWAN, delivers the real-time, circuit-level visibility you need to stay ahead of breakdowns and improve asset reliability across your electrical infrastructure.

Predict Issues Before They Escalate
The CT300 enables predictive maintenance by continuously monitoring current draw on critical assets like turbines, compressors, pumps, inverters, and transformers. Subtle changes in current often signal developing problems—like motor fatigue, mechanical wear, or electrical imbalance—long before visible failure. With minute-by-minute data, you can schedule maintenance proactively, reduce emergency repairs, and extend equipment life.

Built for Simplicity and Scale

  • Self-Powered Monitoring: The CT300 requires no external power or batteries, harvesting energy directly from the circuit being monitored.
  • Wireless by Design: Leveraging LoRaWAN for long-range, low-power communications, it transmits data securely and reliably—ideal for remote substations, treatment plants, and generation sites.
  • Non-Intrusive Installation: Snap-on form factor allows for fast deployment with no rewiring, even in energized panels.
  • Multi-Circuit Visibility: Monitor multiple assets and devices simultaneously across vast infrastructure networks.

Use Cases in Energy and Utilities

Power Generation
  • Monitor turbine and compressor motors to detect imbalance, bearing degradation, or phase loss.
  • Identify load anomalies in transformers that may indicate overheating or insulation failure.
  • Prevent pump failures by detecting increased motor strain due to clogs or mechanical drag.
  • Track blower and filtration system performance to avoid regulatory violations.
  • Detect inverter degradation and imbalance in solar systems.
  • Monitor wind turbine motor performance and generator stress levels in real time.
  • Gain insights into load conditions and anomalies on critical switchgear, breakers, and relays.
  • Automate alerts and maintenance tickets based on current deviation thresholds.

Why Choose the MultiTech CT300?

  • No Complex Wiring – Installs in minutes without disturbing operations
  • No Batteries – Energy-harvesting design is truly maintenance-free
  • No Guesswork – Actionable insights help you plan maintenance, avoid outages, and reduce repair costs
  • No Limits – Scales from individual assets to nationwide utility networks

Powering Proactive Utilities
Whether you’re managing energy distribution, water treatment, or renewable generation, the MultiTech CT300 empowers your teams to prevent failure before it happens—improving uptime, reducing service interruptions, and supporting smarter infrastructure management.

Preventative Maintenance for Manufacturing with the MultiTech CT300

Keep Production Running. Eliminate Unplanned Downtime. Extend Equipment Life.

In high-output manufacturing environments, a single equipment failure can bring production to a standstill—impacting throughput, quality, and revenue. The MultiTech CT300 Current Transformer provides a powerful, wireless solution for predictive maintenance, delivering real-time current data that reveals early warning signs of equipment stress or failure.

Predict Problems Before They Stop Production
The CT300 continuously monitors electrical current draw at the circuit level. It detects anomalies—such as motor overload, imbalance, or phase loss—that often occur before mechanical breakdowns. With minute-by-minute energy insights, manufacturers can address wear and inefficiencies before they impact uptime, product quality, or safety.

Designed for Industrial Simplicity and Scale

  • Self-Powered Monitoring: No batteries. No power source. The CT300 draws energy from the wire it’s clipped to.
  • LoRaWAN Connectivity: Wirelessly transmits current data over long distances using a secure, low-power network—ideal for industrial settings with multiple lines and large facilities.
  • Non-Intrusive Installation: Installs without rewiring or downtime—perfect for active production environments.
  • Supports Multi-Machine Visibility: Monitor dozens of machines and devices across production cells and plant floors.

Use Cases in Industrial Manufacturing

Automotive
  • Monitor robotic arms and CNC machines to detect tool wear, misalignment, or servo motor overload.
  • Track conveyor motor performance to identify excess friction or mechanical drag.
  • Predict refrigeration compressor failure due to coolant issues or motor wear.
  • Detect misalignment or drive failure in bottling lines, mixers, and packaging equipment.
  • Monitor HVAC and cleanroom air handler loads to detect filter clogging or motor degradation.
  • Ensure stable operation of vacuum pumps and environmental control systems.
  • Track current draw in injection molding machines, extruders, and hydraulic presses to schedule maintenance before mechanical faults occur.
  • Identify phase imbalances or overloading conditions in large industrial ovens and kilns.
Why Choose the MultiTech CT300?
  • No Downtime Required – Deploy in live environments with no disruption
  • Wireless and Self-Powered – Reduce infrastructure costs and maintenance overhead
  • Predictive, Not Reactive – Detect anomalies before failure happens
  • Flexible and Scalable – Ideal for both individual machines and entire production lines
Built for Modern Manufacturing Operations Whether you’re operating a discrete or process manufacturing facility, the MultiTech CT300 empowers your maintenance team with data-driven insights that reduce unplanned downtime, extend equipment lifespan, and keep production running smoothly. Its non-intrusive, wireless design makes it easy to scale across multiple sites and integrate into existing LoRaWAN networks.

Preventative Maintenance for Transportation & Logistics with the MultiTech CT300

Keep Fleets Moving. Protect Critical Assets. Prevent Downtime.

In transportation hubs, logistics centers, and warehouse operations, equipment uptime is mission-critical. The MultiTech CT300 Current Transformer Sensor delivers wireless, real-time current monitoring that enables predictive maintenance for motors, conveyors, HVAC systems, and more—helping logistics operators reduce costly breakdowns and maintain continuous flow of goods and services.

Real-Time Monitoring for Predictive Insights
The CT300 enables early detection of mechanical wear, electrical imbalance, and performance degradation—before systems fail. With minute-by-minute current readings, operators can identify abnormal load behavior, automate maintenance schedules, and avoid disruptions in loading, transport, and fulfillment operations.

Engineered for Fast, Flexible Deployment

  • Self-Powered Design: The CT300 draws energy from the circuit it monitors—no need for batteries or external power.
  • LoRaWAN Connectivity: Long-range, low-power wireless transmission provides secure, reliable communication across expansive warehouse floors, terminals, and intermodal facilities.
  • Non-Invasive Installation: No rewiring or downtime required—just clamp it on and start collecting data.
  • Multi-Asset Monitoring: Monitor conveyors, dock doors, cranes, cooling units, and other vital systems simultaneously.

Use Cases in Transportation & Logistics

Distribution Centers & Warehousing
  • Monitor conveyor belt motors for stress and drive failures.
  • Detect wear in overhead crane motors and hoists used for heavy freight.
  • Track HVAC system loads to maintain climate control and refrigeration compliance.
  • Ensure continuous operation of baggage handling systems by detecting abnormal motor loads.
  • Monitor runway lighting and backup power systems for early fault detection.
  • Automate alerts for elevator and escalator motor wear in high-traffic areas.
  • Track energy use and detect anomalies in electric vehicle (EV) charging stations.
  • Monitor lifts, compressors, and ventilation systems for mechanical strain or imbalance.
  • Enable condition-based maintenance scheduling for shop equipment.
  • Monitor walk-in cooler and reefer unit compressors to prevent spoilage.
  • Detect door heater failures or overload conditions in dock areas.

Why Choose the MultiTech CT300?

  • Rapid Install, Zero Downtime – Non-intrusive and ready in minutes
  • Wireless & Self-Powered – No battery changes or electrical wiring needed
  • Real-Time Insights – Minute-by-minute data for predictive alerts and analytics
  • Built to Scale – Monitor multiple devices and circuits across large facilities and multi-site operations

Optimize Operations, One Amp at a Time
The MultiTech CT300 helps logistics and transportation operations avoid costly interruptions by enabling smarter, condition-based maintenance. From warehouses to terminals to fleet service centers, it delivers the visibility needed to extend asset life, boost uptime, and improve operational efficiency—without disrupting your workflow.

Preventative Maintenance for Healthcare Facilities with the MultiTech CT300

Ensure Uptime. Protect Critical Equipment. Deliver Reliable Care.

In hospitals, clinics, and medical research facilities, equipment downtime isn’t just inconvenient—it can compromise patient care, violate regulations, and increase operational risk. The MultiTech CT300 Current Transformer, powered by LoRaWAN, offers a low-touch, high-impact solution for predictive maintenance across essential electrical systems and infrastructure.

Proactive Monitoring for Critical Medical Environments
The CT300 enables minute-by-minute current monitoring to detect subtle signs of motor stress, equipment overload, or system imbalance. By catching problems early—before failure occurs—healthcare facilities can maintain continuity of care, reduce emergency repairs, and comply with regulatory standards.

Hassle-Free Deployment in Sensitive Environments

  • Self-Powered Design: No batteries, no wired power—the CT300 harvests energy directly from the circuit it monitors.
  • Wireless LoRaWAN Connectivity: Securely transmits data over long distances within large campuses and between departments without interfering with existing hospital networks.
  • No-Interrupt Installation: Non-intrusive, clip-on design enables fast installation in active clinical environments without powering down equipment.
  • Facility-Wide Visibility: Scale across multiple devices, departments, and buildings for complete infrastructure awareness.

Use Cases in Healthcare Facilities

Backup Power & Life Safety Systems
  • Monitor current draw on backup generators, UPS systems, and emergency lighting to detect load imbalances or degradation.
  • Prevent failure of vital systems during power loss by proactively identifying maintenance needs.
  • Track energy consumption of vaccine freezers, pharmacy coolers, and lab sample storage to detect compressor failure or door seal degradation.
  • Maintain cold chain compliance through early fault detection.
  • Monitor air handler and filtration motor loads to detect performance decline, clogged filters, or fan imbalance—critical for clean rooms, ORs, and isolation wards.
  • Ensure HVAC systems operate reliably to support infection control and patient comfort.
  • Monitor lab-grade refrigerators, centrifuges, sterilizers, and environmental chambers to ensure consistent performance and reduce surprise failures.
  • Track maintenance needs for autoclaves and other electrically powered sanitation equipment.

Why Choose the MultiTech CT300 for Healthcare?

  • Zero Downtime Installation – Maintain uninterrupted care while deploying energy monitoring
  • Low Maintenance, Self-Powered – No batteries to change, no manual intervention
  • Real-Time, Circuit-Level Data – Spot problems early and act before systems fail
  • Ideal for Sensitive Environments – Wireless design avoids interference with medical and IT systems

Smarter Maintenance, Safer Care
From emergency preparedness to everyday operations, the MultiTech CT300 empowers healthcare teams to stay ahead of equipment failure and compliance risks. With non-intrusive installation, reliable data, and seamless scalability, it’s the smart choice for modern hospitals and healthcare networks focused on resilience, safety, and efficiency.

Preventative Maintenance for Commercial Real Estate with the MultiTech CT300

Reduce Operating Costs. Improve Building Performance. Prevent Equipment Downtime.

In commercial buildings, equipment failure can disrupt tenant operations, drive up energy bills, and lead to costly emergency repairs. The MultiTech CT300 Current Transformer , featuring long-range LoRaWAN connectivity, empowers property owners and facility managers with the tools they need to detect issues early and maintain high-performing, efficient buildings.

Smarter Building Maintenance Starts with Energy Data
The CT300 delivers minute-by-minute visibility into circuit-level power usage—helping identify equipment wear, motor imbalance, and electrical anomalies before failures occur. Whether you’re managing HVAC systems, elevators, or lighting panels, the CT300 provides the data you need to make smarter, more proactive maintenance decisions.

Fast to Deploy. Easy to Scale.

  • Self-Powered Design: No batteries or external power needed—the CT300 powers itself from the circuit it monitors.
  • LoRaWAN Wireless Technology: Transmit data across large office complexes, high-rise buildings, or mixed-use facilities without relying on Wi-Fi or cellular plans.
  • Non-Intrusive Installation: Simply clamp onto the circuit—no rewiring, no downtime, and no disruption to tenant spaces.
  • Comprehensive Monitoring: Scale from a few key assets to an entire building portfolio with centralized data access.

Use Cases in Commercial Real Estate

HVAC & Chiller Systems
  • Detect inefficiencies caused by fan degradation, blocked airflow, or failing compressors.
  • Predict maintenance needs and reduce complaints related to temperature inconsistencies.
  • Monitor motor current for signs of wear, overuse, or electrical imbalance.
  • Minimize costly service calls and avoid tenant dissatisfaction caused by unexpected outages.
  • Track energy usage and detect load anomalies in lighting circuits and building control systems.
  • Identify high-draw or faulty lighting zones that increase operational expenses.
  • Ensure backup generators, battery systems, and emergency lighting are functioning correctly by monitoring standby current draw and load behavior.
  • Comply with safety regulations and minimize liability risks.
  • Accurately monitor tenant energy use at the panel level to support cost allocation and LEED/ESG performance tracking.
  • Automate energy monitoring without the need for traditional submeters.

Why Building Managers Choose the CT300

  • No Downtime Required – Install without interrupting tenant operations
  • No Ongoing Maintenance – Self-powered and wireless for minimal upkeep
  • Real-Time Alerts & Insights – Address performance issues before they become emergencies
  • Scalable Across Properties – Monitor one building or hundreds from a single dashboard

Transform Facility Maintenance with Actionable Energy Intelligence
The MultiTech CT300 helps commercial real estate owners and facility managers move from reactive repairs to proactive performance. With real-time monitoring, simple deployment, and wireless flexibility, it’s the ideal solution for modern buildings focused on uptime, tenant satisfaction, and energy efficiency.

Preventative Maintenance for Industrial & Heavy Equipment with the MultiTech CT300

Avoid Downtime. Detect Failures Early. Keep Heavy Equipment Running

In industrial operations, equipment failure can bring entire production lines or facilities to a halt—costing thousands in lost output and repairs. The MultiTech CT300 Current Transformer, equipped with LoRaWAN wireless technology, delivers real-time current monitoring that helps you catch issues early and keep your most critical machines operating reliably.

Monitor Equipment Health with Real-Time Energy Insights
From motors and compressors to hydraulic presses and welders, the CT300 provides circuit-level current data that reveals signs of stress, imbalance, and inefficiency—before damage occurs. This insight enables predictive maintenance strategies that reduce downtime, extend equipment lifespan, and improve overall plant performance.

Built for Demanding Industrial Environments

  • Self-Powered Design: No batteries, no external power—the CT300 harvests energy directly from the monitored circuit.
  • LoRaWAN Connectivity: Long-range, low-power wireless communication ensures consistent data flow across large industrial sites and remote facilities.
  • Quick, Non-Invasive Installation: Clamp the sensor onto energized circuits without interrupting operations or requiring specialized tools.
  • Multi-Machine Visibility: Monitor multiple assets simultaneously for broad operational awareness.

Use Cases in Industrial and Heavy Equipment Applications

Hydraulic Presses and CNC Machines
  • Detect increases in motor current that indicate bearing wear, tool misalignment, or seal degradation.
  • Enable condition-based maintenance to avoid production delays and improve quality control.
  • Monitor for excessive current draw caused by clogging, cavitation, or mechanical drag.
  • Prevent overheating and extend service intervals for rotating equipment.
  • Track power consumption trends to detect voltage fluctuations or phase imbalances.
  • Reduce risk of product defects or safety hazards due to equipment inconsistencies.
  • Monitor hoists, conveyors, cranes, and gantries for motor fatigue, imbalance, or overuse.
  • Automate alerts for overloading or cycle limit violations.
  • Track usage patterns and performance of large generators, switchgear, and industrial panels.
  • Identify phase loss or load anomalies in mission-critical infrastructure.

Why Industrial Operators Choose the MultiTech CT300

Fast Deployment, Zero Downtime – Deploy during active production without interrupting operations

  • Self-Powered and Wireless – No need for batteries, wired power, or complex integrations
  • Real-Time, Actionable Data – Spot problems early and reduce emergency repair costs
  • Flexible and Scalable – Ideal for single-machine monitoring or full plant-wide visibility

Turn Your Equipment into a Source of Intelligence
The MultiTech CT300 empowers plant managers, reliability engineers, and maintenance teams to shift from reactive fixes to predictive strategies. Whether you’re running a single production cell or managing a multi-site operation, the CT300 gives you the insight needed to reduce downtime, lower maintenance costs, and maximize productivity.

Preventative Maintenance for Education & Government Facilities with the MultiTech CT300

Protect Infrastructure. Reduce Costs. Ensure Continuity of Service.

Schools, universities, and government buildings depend on reliable electrical and mechanical systems to support public services, safety, and operational efficiency. The MultiTech CT300 Current Transformer, powered by LoRaWAN, helps facility managers proactively monitor equipment health, reduce energy waste, and prevent unexpected downtime—without costly infrastructure upgrades.

Smarter Maintenance Through Energy Monitoring
The CT300 delivers current data at the circuit level, making it easy to detect early signs of system degradation or malfunction. By identifying abnormal loads, overuse, or motor fatigue, you can schedule maintenance before failure occurs—extending equipment life, improving occupant comfort, and ensuring uninterrupted services.

Simple to Deploy, Built to Scale

  • Self-Powered Operation: No external power or batteries required—the CT300 generates energy directly from the circuit it monitors.
  • LoRaWAN Wireless Technology: Secure, long-range connectivity across entire campuses or municipal buildings—without Wi-Fi, SIM cards, or cellular fees.
  • Non-Invasive Installation: No rewiring or downtime required. Clip-on design allows for fast deployment in active facilities.
  • Portfolio-Wide Visibility: Scale across multiple buildings and campuses with centralized monitoring and analytics.

Use Cases in Educational and Government Buildings

HVAC and Air Quality Systems
  • Detect motor wear and airflow restrictions in rooftop units, AHUs, and chillers.
  • Support healthier learning and working environments by maintaining consistent climate control.
  • Identify load anomalies and inefficiencies in lighting systems or outdated panels.
  • Monitor aging infrastructure to prioritize upgrades and reduce fire risk.
  • Monitor current draw to detect mechanical strain or service needs before failures impact accessibility or safety.
  • Track emergency lighting and backup power systems to ensure compliance and readiness.
  • Monitor lab equipment, computer labs, and server rooms for unusual current patterns.
  • Protect expensive electronics and ensure uptime for remote learning or public services.
Track high-use assets such as compressors, pumps, vacuums, and floor care equipment to prevent unexpected breakdowns.

Why Facility Managers Choose the CT300

  • No Downtime Installation – Ideal for active campuses and buildings open to the public
  • Self-Powered and Maintenance-Free – No batteries to change or wires to install
  • Real-Time Performance Data – Take control with alerts and actionable insights
  • Supports Energy and Sustainability Goals – Monitor usage to improve ESG, LEED, and cost metrics

Safer, Smarter Facilities Begin with Visibility
The MultiTech CT300 gives educational institutions and government agencies the tools to monitor and maintain their infrastructure more efficiently. From K-12 schools and universities to city halls and federal campuses, it offers a cost-effective way to improve reliability, reduce emergency repairs, and support smart building initiatives.

Equipment uptime, asset longevity, and operational efficiency benefit the most from predictive maintenance (PdM)

Industries that rely heavily on equipment uptime, asset longevity, and operational efficiency benefit the most from predictive maintenance (PdM). These sectors often operate with tight production schedules, expensive machinery, and high costs associated with unplanned downtime.

 

MultiTech_CT300_Hero_Clear

More results...